Zebralight H600 Mk IV Headlamp (H600/H600w/H600c/H600d)

Description

Zebralight H600 Mk IV Headlamp (H600/H600w/H600c/H600d)
Zebralight H600 Mk IV Headlamp (H600/H600w/H600c/H600d)
Zebralight H600 Mk IV Headlamp
Operations
This light has 3 main levels (High, Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.
Basic Operation
One short-click turns on the light to High or turns off the light.
Two short-click turns on the light to Medium.
Three short-click turns on the light to the beacon-strobe mode.
Press and hold (for over 0.6 seconds) turns on the light to Low and then Medium and High. Release at the desired level.
Advanced Operation and Configuration
Press and hold to cycle from Low, Medium and High, release at the desired level to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
Double click to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorized after the light is turned off and through battery changes.
The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.
This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) short-click 4 times without pause.
Beacon-strobe mode can be accessed from 3 short-clicks when the light is Off. Once in the beacon-strobe mode, you can double-click to cycle through different types of beacons and strobes. Beacon-strobe settings are memorized when the light is turned off and through battery changes.
PID Thermal Regulation Temperature Programming for three highest output levels
Turn off the light from H1 and then turn back on to H1
Press and hold to cycle from Low to High 6 times
On the 7th (or more) cycle, release the switch
when High, to add 1 degree C (up to 5 max)
when Med, to revert back to the factory default
when Low, to subtract 1 degree C (up to 5 max)
Multiple Mode Groups
This light comes with three mode groups, G5, G6 and G7. The G5, set as the factory default, can be selected with 5-click from OFF, while G6 and G7 can be selected with 6-click and 7-click from OFF respectively. Mode group selections are memorized after the light is turned off and through battery changes.
In all three mode groups
H can be either H1 or H2; M can be either M1 or M2; L can be either L1 or L2
from OFF: 1-click to H; 2-click to M; press and hold to cycle from L, M to H
In G5
H1 is fixed at 1358Lm, H2 can be 849, 487, or 256Lm
M1 is fixed at 124Lm, M2 can be 55, 22.2, or 8.3Lm
L1 is fixed at 2.8Lm, L2 can be 0.9, 0.26, or 0.07Lm
In G6 and G7
H1, H2, M1, M2, L1 and L2 can be programmed to any of the 12 available brightness levels
Double-click 6 times at the H1, H2, ...L2 to enter the programming mode for that level. Once in the programming mode, use double-click to go up one level and triple-click to go down one level. Use 1-click to exit the programming mode
Three consecutive 5-click (or 6-click, 7-click) to reset the G5 (or G6, G7) back to the factory default settings
Accessories in the package
Two O-rings
Pocket clip
Headband with removable top strap, and a black silicone holder
Descriptions
H600w
Cree XHP35 Neutral White LED
Nominal CCT: 4500K
CRI: 80+
Tint deviation: 5-step
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High: H1
1400
Lm (PID, 2.8 hrs) or H2
875
Lm (PID, 2.9 hrs)/
502
Lm (PID, 3.2 hrs)/
264
Lm (6.3 hrs)
Medium: M1
127
Lm (13.8 hrs) or M2
56.4
Lm (28 hrs)/
22.9
Lm (2.8 days)/
8.5
Lm (7.3 days)
Low: L1
2.9
Lm (18.5 days) or L2
0.92
Lm (1.5 months)/
0.26
Lm (3 months)/
0.07
Lm (4 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Operating Voltage Range: 2.7V - 6.0V
Battery: One flat top unprotected 18650 size li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
80 degree spill
12 degree hot spot
Dimensions
Head Diameter:
0.96
inch (24.5 mm)
Length:
3.85
inch (97.8 mm)
Weight
1.3
oz (38 gram) without battery
Features
PID thermal regulated outputs (three highest output levels)
Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Sealed and potted LED driver circuitry
Tempered optical grade glass
Orange peel textured reflector
Battery reverse polarity protection
Waterproof to IPX8 (2 meters, 30 minutes)
H600c
LED: Cree XHP50.2 Neutral White LED
Nominal CCT: 4000K
Typical CRI: 90+
Tint deviation: 3-step
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High: H1
1616
Lm (PID, 2.5 hrs) or H2
1010
Lm (PID, 2.9 hrs)/
579
Lm (PID, 3.1 hrs)/
305
Lm (5.3 hrs)
Medium: M1
147
Lm (12.5 hrs) or M2
65
Lm (27.5 hrs)/
26.4
Lm (2.7 days)/
9.9
Lm (7.1 days)
Low: L1
3.4
Lm (17.5 days) or L2
1.06
Lm (2 months)/
0.3
Lm (3.8 months)/
0.08
Lm (5.4 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Operating Voltage Range: 2.7V - 6.0V
Battery: One flat top unprotected 18650 size li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
17 degree hot spot
80 degree spill
Dimensions
Head Diameter:
0
.95
inch (24.2 mm)
Length:
3.85
inch (97.8 mm)
Weight
1.4
oz (39 gram)
3.0
oz (84.6 gram) with ZL635 battery
4.4
oz (124.6 gram) with ZL635 battery and headband
Features
PID thermal regulated outputs (three highest output levels)
Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Sealed and potted LED driver circuitry
Corning Gorilla Glass
Battery reverse polarity protection
Orange peel textured reflector
Waterproof to IPX8 (2 meters, 30 minutes)
H600d
LED: Cree XHP50.2 Neutral White LED
Nominal CCT: 5000K
Typical CRI: 90+
Tint deviation: 3-step
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High: H1
1616
Lm (PID, 2.5 hrs) or H2
1010
Lm (PID, 2.9 hrs)/
579
Lm (PID, 3.1 hrs)/
305
Lm (5.3 hrs)
Medium: M1
147
Lm (12.5 hrs) or M2
65
Lm (27.5 hrs)/
26.4
Lm (2.7 days)/
9.9
Lm (7.1 days)
Low: L1
3.4
Lm (17.5 days) or L2
1.06
Lm (2 months)/
0.3
Lm (3.8 months)/
0.08
Lm (5.4 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Operating Voltage Range: 2.7V - 6.0V
Battery: One flat top unprotected 18650 size li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
17 degree hot spot
80 degree spill
Dimensions
Head Diameter:
0
.95
inch (24.2 mm)
Length:
3.85
inch (97.8 mm)
Weight
1.4
oz (39 gram)
3.0
oz (84.6 gram) with ZL635 battery
4.4
oz (124.6 gram) with ZL635 battery and headband
Features
PID thermal regulated outputs (three highest output levels)
Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Sealed and potted LED driver circuitry
Corning Gorilla Glass
Battery reverse polarity protection
Orange peel textured reflector
Waterproof to IPX8 (2 meters, 30 minutes)
×
Shipping info
Click the Shipping & Payments tab above the listing description for more info
Price:
.99
(local shipping)
Click the Shipping & Payments tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on eBay!
Additional Information
No additional information at this time
Ask seller a question
You might also like
Caving Harness Gear Loop
Aventure Verticale Spelshoulder Chest Harness - Caving, Canyoneering
Rock Exotica rockD Stainless Screw-Lock Carabiner C2SS
Dorton Industries Footloop - Caving, Climbing, Rope Access, Canyoneering
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Elevated Climbing
Shipping & Payments
Shipping is a flat rate across US at a rate of .99
Payment
Accepted Payment Methods
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.
Thank you for shopping with us on eBay!
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by