-40%
Cisco Catalyst WS-C4510R+E w/ x2 WS-X45-SUP8-E, x8 WS-X4748-UPOE+E, x2 9000ACV
$ 648.37
- Description
- Size Guide
Description
Up for sale isCisco Catalyst WS-C4510R+E w/ x2 WS-X45-SUP8-E, x8 WS-X4748-UPOE+E, x2 9000ACV
This sale includes This sale includes one Catalyst switch with modules, power supplies and SFPs. No other accessories included.
This unit has been used but still appears to be in good condition with minor scratches and scuff marks from normal wear and tear.
This item has been tested
Powered on via 208VAC. System passes POST.
Connected via console to each SUP module (switched between active/standby) and reset to factory defaults.
Linecards' status reads healthy. Connected to PoE ports; link established and was able to provide power.
Reset and ready to be configured.
Console log and hardware details below:
Power-on-self-test for Module 6: WS-X45-SUP8-E
CPU Subsystem Tests ...
seeprom: Pass
Traffic: L3 Loopback ...
Test Results: Pass
Traffic: L2 Loopback ...
Test Results: Pass
post done
Power-on-self-test for Module 5: WS-X45-SUP8-E
CPU Subsystem Tests ...
seeprom: Pass
Traffic: L3 Loopback ...
Test Results: Pass
Traffic: L2 Loopback ...
Test Results: Pass
post done
Switch#sh env
no temperature alarms
Module Sensor Temperature Status
------+--------------------------+--------------------+------------
1 Air inlet 32C (56C,68C,71C) ok
1 Air inlet remote 24C (46C,59C,62C) ok
1 Air outlet 33C (66C,76C,79C) ok
1 Air outlet remote 28C (60C,71C,74C) ok
2 Air inlet 33C (56C,68C,71C) ok
2 Air inlet remote 24C (46C,59C,62C) ok
2 Air outlet 33C (66C,76C,79C) ok
2 Air outlet remote 28C (60C,71C,74C) ok
3 Air inlet 33C (56C,68C,71C) ok
3 Air inlet remote 24C (46C,59C,62C) ok
3 Air outlet 32C (66C,76C,79C) ok
3 Air outlet remote 27C (60C,71C,74C) ok
4 Air inlet 31C (56C,68C,71C) ok
4 Air inlet remote 24C (46C,59C,62C) ok
4 Air outlet 31C (66C,76C,79C) ok
4 Air outlet remote 26C (60C,71C,74C) ok
5 Air inlet 24C (50C,66C,72C) ok
5 Air outlet 42C (73C,80C,92C) ok
5 XPP 73C (101C,120C,123C) ok
5 IFE 36C (65C,90C,120C) ok
5 CONAN 43C (67C,82C,100C) ok
5 CPU 37C (69C,102C,105C) ok
6 Air inlet 24C (50C,66C,72C) ok
6 Air outlet 42C (73C,80C,92C) ok
6 XPP 79C (101C,120C,123C) ok
6 IFE 37C (65C,90C,120C) ok
6 CONAN 41C (67C,82C,100C) ok
6 CPU 38C (69C,102C,105C) ok
7 Air inlet 32C (56C,68C,71C) ok
7 Air inlet remote 24C (46C,59C,62C) ok
7 Air outlet 31C (66C,76C,79C) ok
7 Air outlet remote 26C (60C,71C,74C) ok
8 Air inlet 32C (56C,68C,71C) ok
8 Air inlet remote 24C (46C,59C,62C) ok
8 Air outlet 32C (66C,76C,79C) ok
8 Air outlet remote 27C (60C,71C,74C) ok
9 Air inlet 32C (56C,68C,71C) ok
9 Air inlet remote 24C (46C,59C,62C) ok
9 Air outlet 32C (66C,76C,79C) ok
9 Air outlet remote 27C (60C,71C,74C) ok
10 Air inlet 32C (56C,68C,71C) ok
10 Air inlet remote 24C (46C,59C,62C) ok
10 Air outlet 33C (66C,76C,79C) ok
10 Air outlet remote 27C (60C,71C,74C) ok
Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C45-9000ACV AC 9000W good good good
PS1-1 off
PS1-2 220V good
PS1-3 off
PS2 PWR-C45-9000ACV AC 9000W good good good
PS2-1 off
PS2-2 220V good
PS2-3 off
Power supplies needed by system : 1
Power supplies currently available : 2
Chassis Type : WS-C4510R+E
Power consumed by backplane : 40 Watts
Switch Bandwidth Utilization : 0%
Supervisor Led Color : Green
Module 1 Status Led Color : Green PoE Led Color : Green
Module 2 Status Led Color : Green PoE Led Color : Green
Module 3 Status Led Color : Green PoE Led Color : Green
Module 4 Status Led Color : Green PoE Led Color : Green
Module 5 Status Led Color : Green
Module 6 Status Led Color : Green
Module 7 Status Led Color : Green PoE Led Color : Green
Module 8 Status Led Color : Green PoE Led Color : Green
Module 9 Status Led Color : Green PoE Led Color : Green
Module 10 Status Led Color : Green PoE Led Color : Green
Beacon Led Status : off
Fantray : Good
Fantray removal timeout : 240
Power consumed by Fantray : 255 Watts
Switch#sh inv
NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4510R+E 10 slot switch "
PID: WS-C4510R+E , VID: V06 , SN: FXS1747Q05T
NAME: "Clock Module", DESCR: "Clock Module"
PID: WS-X4K-CLOCK-E , VID: V01 , SN: FXS174506FP
NAME: "Mux Buffer 1 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX= , VID: , SN: FXS17450AJH
NAME: "Mux Buffer 2 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX= , VID: , SN: FXS1745091J
NAME: "Mux Buffer 3 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX= , VID: , SN: FXS1745091H
NAME: "Mux Buffer 4 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX= , VID: , SN: FXS17450AJQ
NAME: "Mux Buffer 7 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX= , VID: , SN: FXS174508Z3
NAME: "Mux Buffer 8 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX= , VID: , SN: FXS17450A5A
NAME: "Mux Buffer 9 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX= , VID: , SN: FXS174408X0
NAME: "Mux Buffer 10 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX= , VID: , SN: FXS17450AJS
NAME: "Linecard(slot 1)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E , VID: V01 , SN: CAT1746L3FZ
NAME: "Linecard(slot 2)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E , VID: V01 , SN: CAT1747L1FB
NAME: "Linecard(slot 3)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E , VID: V01 , SN: CAT1747L1D6
NAME: "Linecard(slot 4)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E , VID: V01 , SN: CAT1746L20M
NAME: "Supervisor(slot 5)", DESCR: "Sup 8-E 10GE (SFP+), 1000BaseX (SFP) with 8 SFP+ Ports"
PID: WS-X45-SUP8-E , VID: V02 , SN: CAT1749L0RB
NAME: "Supervisor(slot 6)", DESCR: "Sup 8-E 10GE (SFP+), 1000BaseX (SFP) with 8 SFP+ Ports"
PID: WS-X45-SUP8-E , VID: V02 , SN: CAT1748L8CF
NAME: "TenGigabitEthernet6/1", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: AGA123912TG
NAME: "TenGigabitEthernet6/2", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1012C20R
NAME: "TenGigabitEthernet6/3", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS12320WYL
NAME: "Linecard(slot 7)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E , VID: V01 , SN: CAT1746L0HK
NAME: "Linecard(slot 8)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E , VID: V01 , SN: CAT1747L1HU
NAME: "Linecard(slot 9)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E , VID: V01 , SN: CAT1746L03Z
NAME: "Linecard(slot 10)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E , VID: V01 , SN: CAT1746L4XZ
NAME: "FanTray 1", DESCR: "FanTray"
PID: WS-X4582+E , VID: V02 , SN: FXS1744Q37Q
NAME: "Power Supply 1", DESCR: "Power Supply ( AC 9000W )"
PID: PWR-C45-9000ACV , VID: V02 , SN: DTM17330235
NAME: "Power Supply 2", DESCR: "Power Supply ( AC 9000W )"
PID: PWR-C45-9000ACV , VID: V02 , SN: DTM2032032L
Switch#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSALK9-M), Version 03.08.06.E RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 05-Apr-18 03:55 by prod_rel_team
ROM: 15.1(1r)SG10
System returned to ROM by power-on
System image file is "bootflash:cat4500es8-universalk9.SPA.03.08.06.E.152-4.E6.bin"
Jawa Revision 3, RadTrooper Revision 0x0.0x41, Conan Revision 0x1B9E
Last reload reason: power-on
License Information for 'WS-X45-SUP8-E'
License Level: entservices Type: Permanent
Next reboot license Level: entservices
cisco WS-C4510R+E (P5040) processor (revision 2) with 4194304K bytes of physical memory.
Processor board ID FXS1747Q05T
P5040 CPU at 2.2GHz, Supervisor 8-E
Last reset from PowerUp
1 Virtual Ethernet interface
384 Gigabit Ethernet interfaces
16 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2102
Switch#sh module
Chassis Type : WS-C4510R+E
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT1746L3FZ
2 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT1747L1FB
3 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT1747L1D6
4 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT1746L20M
5 8 Sup 8-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP8-E CAT1749L0RB
6 8 Sup 8-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP8-E CAT1748L8CF
7 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT1746L0HK
8 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT1747L1HU
9 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT1746L03Z
10 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT1746L4XZ
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 24e9.b3f4.07f0 to 24e9.b3f4.081f 1.1 Ok
2 a80c.0d8f.cea0 to a80c.0d8f.cecf 1.1 Ok
3 a80c.0d8f.cf00 to a80c.0d8f.cf2f 1.1 Ok
4 24e9.b3f4.0520 to 24e9.b3f4.054f 1.1 Ok
5 24e9.b370.6f00 to 24e9.b370.6f07 1.0 15.1(1r)SG10 03.08.06.E Ok
6 24e9.b370.6f08 to 24e9.b370.6f0f 1.0 15.1(1r)SG10 03.08.09.E Ok
7 24e9.b3f3.fd10 to 24e9.b3f3.fd3f 1.1 Ok
8 24e9.b3f4.1570 to 24e9.b3f4.159f 1.1 Ok
9 78da.6ed3.0930 to 78da.6ed3.095f 1.1 Ok
10 78da.6ed3.0c30 to 78da.6ed3.0c5f 1.1 Ok
Mod Redundancy role Operating mode Redundancy status
----+-------------------+-------------------+----------------------------------
5 Active Supervisor SSO Active
6 Standby Supervisor SSO Standby hot
Switch#
What you see in pictures is what you will receive. Additional accessories are not included. If we have a quantity of this item available, it might not be the exact item in pictures but it will be in similar condition.
For questions and inquiries, we are open Monday through Friday 8AM-5PM EST. We are closed on weekends and major US Holidays.
R2/RIOS Certification Conditions:
Potomac eCycle is certified to the R2/RIOS Standard which was created specifically for the Electronics Recycling industry to promote Environmental, Health and Safety. To comply with the standard we have implemented quality assurance plan and we categorize every item we sell into one of these R2/RIOS conditions.
R2 Ready for Reuse:
use effective test methods to confirm that all functions for equipment and components are working properly and ready for reuse, including properly configured with appropriate legally licensed software where required for operation of equipment and components, and device specific drivers within the product's hardware. This may include new items, new open box, new old stock, and items refurbished to close to factory specifications.
R2 Ready for Resale:
use effective test methods and testing equipment to confirm that the Key Functions of the equipment or components are working properly. This may include used items that have been fully tested but might lack software, have cosmetic issues, or have a part missing.
R2 Ready for Repair /
R2 Vintage Exception
:
this condition is strictly for items that are not functioning, and further, it is especially for items that have high numismatic value, such as old vintage radios that might not be operable, but in good enough cosmetic condition to restore.
R2 Exempt:
this condition is for items that do not contain any electronic components and therefore are exempt from the R2 Certification Conditions.
