Cisco Catalyst WS-C4510R+E w/ x2 WS-X45-SUP8-E, x8 WS-X4748-UPOE+E, x2 9000ACV

Description

Up for sale is
Cisco Catalyst WS-C4510R+E w/ (x2) WS-X45-SUP8-E, (x8) WS-X4748-UPOE+E, (x2) PWR-C45-9000ACV
This sale includes one Catalyst switch with modules, power supplies and SFPs. No other accessories included.
This unit has been used but still appears to be in good condition with minor scratches and scuff marks from normal wear and tear.
This item has been tested
Powered on via 208VAC. System passes POST.
Connected via console to each SUP module (switched between active/standby) and reset to factory defaults.
Linecards' status reads healthy. Connected to PoE ports; link established and was able to provide power.
Reset and ready to be configured.
Console log and hardware details below:
Power-on-self-test for Module 6: WS-X45-SUP8-E
CPU Subsystem Tests ...
seeprom: Pass
Traffic: L3 Loopback ...
Test Results: Pass
Traffic: L2 Loopback ...
Test Results: Pass
post done
Power-on-self-test for Module 5: WS-X45-SUP8-E
CPU Subsystem Tests ...
seeprom: Pass
Traffic: L3 Loopback ...
Test Results: Pass
Traffic: L2 Loopback ...
Test Results: Pass
post done
Switch#sh inv
NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4510R+E 10 slot switch "
PID: WS-C4510R+E       , VID: V02  , SN: FOX1521G436
NAME: "Clock Module", DESCR: "Clock Module"
PID: WS-X4K-CLOCK-E    , VID: V01  , SN: NWG151806LX
NAME: "Mux Buffer 1 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX=      , VID:      , SN: NWG15030CBA
NAME: "Mux Buffer 2 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX=      , VID:      , SN: NWG15180C3U
NAME: "Mux Buffer 3 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX=      , VID:      , SN: NWG15180CS0
NAME: "Mux Buffer 4 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX=      , VID:      , SN: NWG15030C8Z
NAME: "Mux Buffer 7 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX=      , VID:      , SN: NWG15030CBB
NAME: "Mux Buffer 8 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX=      , VID:      , SN: NWG15030A2F
NAME: "Mux Buffer 9 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX=      , VID:      , SN: NWG1519035M
NAME: "Mux Buffer 10 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-EX=      , VID:      , SN: NWG15180CRW
NAME: "Linecard(slot 1)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E   , VID: V01  , SN: CAT1735L6LN
NAME: "Linecard(slot 2)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E   , VID: V01  , SN: CAT1735L6G5
NAME: "Linecard(slot 3)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E   , VID: V01  , SN: CAT1736L7CP
NAME: "Linecard(slot 4)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E   , VID: V01  , SN: CAT1735L6L4
NAME: "Supervisor(slot 5)", DESCR: "Sup 8-E 10GE (SFP+), 1000BaseX (SFP) with 8 SFP+ Ports"
PID: WS-X45-SUP8-E     , VID: V01  , SN: CAT1736L75L
NAME: "TenGigabitEthernet5/1", DESCR: "1000BaseSX"
PID: Unspecified       , VID:      , SN: FNS1012K04W
NAME: "TenGigabitEthernet5/2", DESCR: "1000BaseSX"
PID: Unspecified       , VID:      , SN: FNS123110KY
NAME: "TenGigabitEthernet5/3", DESCR: "1000BaseSX"
PID: Unspecified       , VID:      , SN: FNS123212CT
NAME: "TenGigabitEthernet5/5", DESCR: "1000BaseSX"
PID: Unspecified       , VID:      , SN: H121FA3
NAME: "TenGigabitEthernet6/3", DESCR: "1000BaseSX"
PID: Unspecified       , VID:      , SN: FNS12320WWZ
NAME: "Linecard(slot 7)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E   , VID: V01  , SN: CAT1734L2A5
NAME: "Linecard(slot 8)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E   , VID: V01  , SN: CAT1735L6HK
NAME: "Linecard(slot 9)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E   , VID: V01  , SN: CAT1735L6DZ
NAME: "Linecard(slot 10)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT UPOE ports (Cisco/IEEE)"
PID: WS-X4748-UPOE+E   , VID: V01  , SN: CAT1735L5JX
NAME: "FanTray 1", DESCR: "FanTray"
PID: WS-X4582+E        , VID: V02  , SN: FOX1519GC4D
NAME: "Power Supply 1", DESCR: "Power Supply ( AC 9000W )"
PID: PWR-C45-9000ACV   , VID: V02  , SN: DTM2032033A
NAME: "Power Supply 2", DESCR: "Power Supply ( AC 9000W )"
PID: PWR-C45-9000ACV   , VID: V02  , SN: DTM20320337
Switch#sh module
Chassis Type : WS-C4510R+E
Power consumed by backplane : 40 Watts
Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1    48  10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E    CAT1735L6LN
2    48  10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E    CAT1735L6G5
3    48  10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E    CAT1736L7CP
4    48  10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E    CAT1735L6L4
5     8  Sup 8-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP8-E      CAT1736L75L
6        Supervisor
7    48  10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E    CAT1734L2A5
8    48  10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E    CAT1734L24N
9    48  10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E    CAT1735L6DZ
10    48  10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E    CAT1735L5JX
M MAC addresses                    Hw  Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
1 e4c7.22ca.7900 to e4c7.22ca.792f 1.1                               Ok
2 e4c7.22ca.78d0 to e4c7.22ca.78ff 1.1                               Ok
3 885a.9244.2850 to 885a.9244.287f 1.1                               Ok
4 e4c7.22ca.7480 to e4c7.22ca.74af 1.1                               Ok
5 e8b7.48cb.1640 to e8b7.48cb.1647 1.0 15.1(1r)SG10 03.11.02.E       Ok
6 Unknown                              Unknown      Unknown          Other
7 c067.afa4.9780 to c067.afa4.97af 1.1                               Ok
8 c067.af76.d59c to c067.af76.d5cb 1.1                               Ok
9 c067.afe1.4690 to c067.afe1.46bf 1.1                               Ok
10 c067.af77.569c to c067.af77.56cb 1.1                               Ok
Mod  Redundancy role     Operating mode      Redundancy status
----+-------------------+-------------------+----------------------------------
5   Active Supervisor   SSO                 Active
6   Standby Supervisor  SSO                 Disabled
Switch#  sh ver
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch  Software (cat4500es8-UNIVERSALK9-M), Version 03.11.02.E RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Sat 14-Mar-20 17:41 by prod_rel_team
ROM: 15.1(1r)SG10
System returned to ROM by reload
System image file is "bootflash:cat4500es8-universalk9.SPA.03.11.02.E.152-7.E2.bin"
Jawa Revision 3, RadTrooper Revision 0x0.0x41, Conan Revision 0x1658
Last reload reason: Reload command
License Information for 'WS-X45-SUP8-E'
License Level: entservices   Type: Permanent
Next reboot license Level: entservices
cisco WS-C4510R+E (P5040) processor (revision 2) with 4194304K bytes of physical memory.
Processor board ID FOX1521G436
P5040 CPU at 2.2GHz, Supervisor 8-E
Last reset from Reload
1 Virtual Ethernet interface
384 Gigabit Ethernet interfaces
16 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2102
What you see in pictures is what you will receive. Additional accessories are not included. If we have a quantity of this item available, it might not be the exact item in pictures but it will be in similar condition.
For questions and inquiries, we are open Monday through Friday 8AM-5PM EST. We are closed on weekends and major US Holidays.
R2/RIOS Certification Conditions:
Potomac eCycle is certified to the R2/RIOS Standard which was created specifically for the Electronics Recycling industry to promote Environmental, Health and Safety. To comply with the standard we have implemented quality assurance plan and we categorize every item we sell into one of these R2/RIOS conditions.
R2 Ready for Reuse:
use effective test methods to confirm that all functions for equipment and components are working properly and ready for reuse, including properly configured with appropriate legally licensed software where required for operation of equipment and components, and device specific drivers within the product's hardware. This may include new items, new open box, new old stock, and items refurbished to close to factory specifications.
R2 Ready for Resale:
use effective test methods and testing equipment to confirm that the Key Functions of the equipment or components are working properly. This may include used items that have been fully tested but might lack software, have cosmetic issues, or have a part missing.
R2 Ready for Repair /
R2 Vintage Exception
:
this condition is strictly for items that are not functioning, and further, it is especially for items that have high numismatic value, such as old vintage radios that might not be operable, but in good enough cosmetic condition to restore.
R2 Exempt:
this condition is for items that do not contain any electronic components and therefore are exempt from the R2 Certification Conditions.